Nuvico EasyTrack CK-1000, Instruction Manual

Page: 25 / 32

4. ADVANCED OPERATION
4.1 Selection of the Camera (ID of the Camera)
There are three ways for dome camera selection
,
and ( Next ) or ( Prev ) . With these
selections, the keyboard controller has the full control of the selected dome camera.
1 ,
4.2 Selection of the DVR (ID of the DVR)
A DVR must be selected before being controlled by the joystick controller.
Press Numeric button, then press button to change DVR ID to be controlled.
DVR
<Ex 1> Select DVR ID #3
Press numeric then button on the controller, DVR-003 will be
displayed on the LCD window.
DVR
3
<Ex 2> Select DVR ID # 73
Press and then button, DVR-073 will be displayed on the LCD window.
7 DVR
3
4.3 Key Description of the Controller
9
Function Key Buttons Description
Numeric
Camera ID selection with CAM SEL key.
Function number selection with function keys.
(e.g.,
1+CAM SEL, 3+Tour, 5+Scan, 6+Prst
)
CAM SEL Select camera ID (address).
0 , 1 ~
ESC Exits from currently running functions or menu, error status, etc.
Alarm
Disregards all currently activated alarms and turns off the beep temporarily. If
alarm is activated again within the programmed hold time, the timer will restart
and beep again.
ON Relay No.
1~4+ ON
will activate the selected relay.
OFF Relay No.
1~4+ OFF
will disable the selected relay.
Home
Immediately calls Home function.
Deletes selected value or function in programming mode
Preset
Pressing Preset will bring up the preset programming menu.
Recalls preset; e.g.;
1, 2… 31… 240 + (Preset)
In the preset or tour programming mode, the operator can review the existing
preset (selected by cursor) by pressing this key.
Tour
Pressing
Tour
will bring up the tour programming menu directly.
Recalls programmed presets or functions sequentially. Ex)
1 ~ 8+ (Tour
)
Pattern
Pressing
Pattern
will bring up the pattern programming menu directly.
Repeats the selected pattern of the current dome camera. Ex)
1 ~ 4+ (Pattern
)
Auto Scan
Pressing Scan will bring up the Auto Scan programming menu.
Calls Auto panning function. ex) 2+ (
Scan
) -- repeats Auto Scan 2.
ESC
CONTROLLER KEYBOARD 24