Nuvico DV turbo NVDV4-16000 Instruction Manual Download Page 87

Page: 87 / 129

DV TURBO SERIES DVR

8.2 TIME

8.2.1 Time Sync

If the DVR is connected to the network, and if there are
more than one DVR connected, then a DVR can be
configured as the master DVR from which all other DVRs
synchronize their time and date. The default is OFF.

•

ON: The DVR is set to Slave DVR and synchronizes

with the master DVR.

•

OFF: The DVR is set to Master DVR and does not

synchronize with any DVRs.

8.2.2 Time Server

Enter the IP address of the Master DVR. This is applicable
only to Slave DVRs.

8.2.3 Date

Prior to adjust the date and time, please stop the recording
first, if the DVR is recording.

Enter the current date in MM/DD/YYYY format.

Summary of Contents for DV turbo NVDV4-16000


































































































































Search results

Summary of Contents for DV turbo NVDV4-16000

Reviews:

Related manuals for DV turbo NVDV4-16000

Brands by name

Popular brands

Nuvico DV turbo NVDV4-16000, Instruction Manual

Search results

Summary of Contents for DV turbo NVDV4-16000

Reviews:

Related manuals for DV turbo NVDV4-16000

Brands by name

Popular brands