4
SECTION 1
– INTRODUCTION
1.1.
USE AND FUNCTION
NF 200 Bench Top Centrifuge is especially designed for the separation of blood samples,
sedimentation of urine particles and for the separation of substance or substance mixtures in
laboratories.
By means of the programmable microprocessor control system, speed, RCF value and time
could be programmed and the ‘pulse’ function allows the operator to run short spins.
NF 200 ensures safe operation by means of the locking system which does not allow the
centrifuge to operate if the lid is open the lid cannot be opened while the rotor is spinning.
There are audible and visible alarms to inform the operator when the lid is open, when the
program ends and when any error condition occurs. In case of a power failure, the lid could
be opened manually by using a manual lid opening tool. There is also an observation hole on
the lid to check the speed of the centrifuge by a tachometer.
NF 200 is delivered with 12x15 ml angle rotor made of polypropylene.
NF 200 Bench Top Centrifuges are manufactured according to the following
standards,
EN 61010-1, EN 61010-2-020, EN 61000-6-3, EN 50419, EN 61326-1.
This device is in compliance with WEEE Regulation.
