19
Ethernet settings should be adjusted by technical service staff for the first usage.
Otherwise, this function does not work.
“E-Mails” is the page which e-mail addresses will be written on.
“Login” is the adjustments for the e-mail addresses.
“E-Mails” is selected on the e-mail page by the
value increase (F1) and decrease (F2) keys. The
page on the left appears when enter key (F4) is
pushed. The e-mail addresses can be typed in this
page and e-mail is sent to these addresses in case
of any failure.
Each character of e-mail addresses is typed one by one. The first character is entered by
pushing value increase (F1) and decrease keys (F2) and tab key (F3) is pushed to enter the
second character. The second character is written by pushing value increase (F1) and
decrease keys (F2) and tab key (F3) is pushed to enter the next character. After all characters
are written completely in this way, push the enter key (F4) to enter the mail server. After
mail server is written in the same way, push the enter key (F4) to write next e-mail address.
After third email address is written, push enter key (F4) to enter other e-mail addresses.
After all e-mail addresses are written as mentioned above, push enter key (F4) and return to
main page.
Tab key (F3) is used for changeover from one character of address to another.
“Login” is selected on the e-mail page by the
value increase (F1) and decrease (F2) keys. The
page on the left appears when enter key (F4) is
pushed. Each character of e-mail addresses is
written one by one. The first character is entered
by pushing value increase (F1) and decrease keys
(F2) and tab key (F3) is pushed to enter the next
character. The second character is entered by
pushing value increase (F1) and decrease keys
(F2) and tab key (F3) is pushed to enter the next character. After all characters of user’s name
are entered by this way, push enter key (F4) to enter the mail server of the e-mail address. After
mail server is entered in the same way, push enter key (F4) to pass the “password” submenu.
Enter the password and push enter key (F4).
The port provided by internet server is entered on the part of “Port”. After port is entered,
enter key (F4) is pushed to return the main menu. Tab key (F3) is used for changes from one
character of address to another.
