20
6.1.5.
“E-Mail” submenu is selected on the menu page
by the value increase (F1) and decrease (F2) keys.
The page shown on the left appears when enter
key (F4) is pushed. The choice of submenus on e-
mail page is changed by pushing increase (F1) and
decrease (F2) keys. After choosing a submenu,
the adjustments for this submenu is made by
pushing enter key (F4). If you want to exit this
page, push the backspace key (F3).
Activation or deactivation of e-mail function can be adjusted from “E-mail” submenu. If you
want to activate this function, choose “on” by pushing the enter key (F4). If you want to
deactivate e-mail function, choose “off” by pushing the enter key (F4).
Ethernet settings should be adjusted by technical service staff for the first usage.
Otherwise, this function does not work.
“E-Mails” is the page which e-mail addresses will be written on.
“Login” is the adjustments for the e-mail addresses.
“E-Mails” is selected on the e-mail page by the
value increase (F1) and decrease (F2) keys. The
page on the left appears when enter key (F4) is
pushed. The e-mail addresses can be typed in this
page and e-mail is sent to these addresses in case
of any failure.
Each character of e-mail addresses is typed one by one. The first character is entered by
pushing value increase (F1) and decrease keys (F2) and tab key (F3) is pushed to enter the
second character. The second character is written by pushing value increase (F1) and
decrease keys (F2) and tab key (F3) is pushed to enter the next character. After all characters
are written completely in this way, push the enter key (F4) to enter the mail server. After
mail server is written in the same way, push the enter key (F4) to write next e-mail address.
After third email address is written, push enter key (F4) to enter other e-mail addresses.
After all e-mail addresses are written as mentioned above, push enter key (F4) and return to
main page.
Tab key (F3) is used for changeover from one character of address to another.
