© 20
20 NUUO Inc. All rights reserved.
www.nuuo.com
23
Thermal Camera User Manual
6.3.2
Temperature change alarm setting:
As shown in 6.3.1, click to enter the Thermal Chart page
Switch to the alarm temperature setting page, add a temperature alarm and check enable
Select Spot1 or Box1 (Min / Max / Avg) from the drop-down menu,
Then select the following two alarm categories for advanced adjustment, as shown in the figure below.
Temperature warning line:
Low temperature warning line / high temperature warning line can set the temperature value separately to trigger
the alarm
The amount of temperature change in unit time:
Set the time range in seconds, then enter the temperature change value to trigger the alarm
The detailed information of the above settings after adjustment can be viewed from the list below, and the selected
number can be enabled, edited or deleted separately.
