NUUO G3 Card, Hardware & Software Installation

Page: 23 / 32

Intelligent Surveillance Solution
System Requirement
page-22
Hardware Installation
Connecting the Audio/Video Cable - referring to the figure on next page.
The audio input connectors are with yellow wires and marks of “A”
on them (such as “A1/9”); the video input connectors are with black
wires and the marks of “V” (such as “V8/16”).
Connecting the Watchdog Wire - referring to the figure on next page.
Plug the Watchdog Wire to the Reset connector of the Hardware
Compression Card and then connect it to the Reset connector on
the main board.
With the
Watchdog Wire connected, the system will be restarted if
any abnormal conditions.