8
desired symbol to input.
Start to Use
Install Memory Card, SIM Card and Battery
When you apply for a network, you will get a plug-in SIM card. SIM
(Subscriber Identity Module) card that contains phone number,
service projects and can be used to store phone numbers and personal
information.
Attention: Do not bend or scratch SIM card, do not let it contact with
static electricity, dust or water.
Keep all SIM cards where children cannot reach or touch.
Note: Keep the SIM card chip contacts face downward. Make the
SIM card fits card slot.
Remove Memory Card, SIM Card and Battery
Note: If the phone is turned on, long press Power Key about 3
seconds until it tips phone options and select
Power off
and
then press
OK
to turn off the phone. Then, remove the battery,
SIM card and memory card.
Do not plug or remove memory card in boot state, otherwise it
will cause damage to the file system.
Charge the Battery
1.
Before charging, check the battery slot to ensure the battery has
been installed correctly.
2.
Plug one end of the charger into phone.
3.
Connect another end of the charger to the socket.
4.
Start charging. It can be charged whether power on or power
off.
▪
In power on state, when the battery icon on screen start
rolling means it is been charged. When the icon is full and stop
