CAVEAT
Note: Please do not tighten any bolt until all bolts have been put into right place.
If you tighten one bolt, it maybe cause other bolts out of position.
Attach table top (A) to 4 legs (C) using 8 bolts (E), 8 washers(D) and 8 spring washers
(F). Do not over tighten.
Attach 4 legs (C) to legs connector (B) using 4 bolts (E), 4 washers (D) and 4 spring
washers (F). Do not over tighten.
Upon completion of full assembly and bolted up-all screws can be tightened down.
ASSEMBLY INSTRUCTIONS
STEP 1
14
E
D
E
D
F
F
