NutriMill SMART JUICER, User Manual

Page: 8 / 12

Juicing
1. Prepare Ingredients to be juiced.
• Wash the ingredients and cut into proper sizes.
• Cut spinach into small pieces before juicing.
• Remove hard seeds, rinds, or other hard outer shells.
2. Press the ON button.
3. Place ingredients into feeding tube, and push down with the pusher as needed.
4. Press the REV once food is juiced and juice flow has stopped.
5. Use the flow control outlet to control the amount of juice released.
6. It is recommended to drink freshly squeezed juice as soon as possible. If exposed to
the air for a long time, valuable nutrients will be lost and taste may be affected.
7. Disassemble and hand wash immediately after use.
8. When the working duration exceeds 9 minutes and 30 seconds, the juicer starts to
emit an alarm sound. Once the alarm has sounded turn off the juicer and allow to
cool for 5 to 10 minutes before resuming use. If the user does not stop the operation,
the product will automatically stop working within 30 seconds after the alarm sounds.
At this time the power switch has been deactivated. Rest the juicer for five to ten
minutes, unscrew the cup lid counterclockwise, and then turn it clockwise again. After
hearing a chime, the device is activated and can be used normally again.