2
CONGRATULATIONS
Welcome to the Family! Congratulations on your
purchase of the NutriMill Classic. This product is superbly
engineered, innovatively designed, and built with lasting
quality. Thank you for your decision to utilize this high
speed fl our mill. We know you will enjoy it for years to
come. After all, it’s a NutriMill.
Benefi ts of Milling:
Eating whole grains on a regular basis helps prevent
cardiovascular disease, stroke, heart attacks and clogged
arteries. Freshly ground fl ours offer the most nutritional
value. The fresher the fl our, the more nutritious and better
tasting your food will be.
3
IMPORTANT SAFEGUARDS
The following safety precautions apply when using electrical appliances:
1. Read all instructions.
2. To protect against electrical shock do not immerse cord, plugs, portable appliances
or milling unit in water or other liquid.
3. Close supervision is necessary when any appliance is used by or near children.
4. Remove plug from outlet when the appliance is not in use, before putting on/taking off
parts and before cleaning.
5. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions or is dropped or damaged in any manner. Return appliance to the
nearest authorized service facility for examination, repair, or electrical or mechanical
adjustment.
6. The use of accessory attachments not recommended by the appliance manufacturer
may cause injuries.
7. Do not use outdoors.
8. Do not let cord hang over edge of table or counter or touch hot surfaces.
9. Do not place on or near a hot gas or electric burner or in a heated oven.
10. Do not use appliance for other than intended use.
11. Avoid contacting moving parts.
12. Save these instructions.
NUTRIMILL CLASSIC SAFETY INSTRUCTIONS
1. Always be sure the separator cup is properly attached before milling.
2. Always be sure the air fi lter is in place before milling.
3. Always be sure your fl our bowl is positioned correctly before milling.
4. Always check your grain for foreign objects before milling. Do not use grain that
has not been cleaned. We recommend purchasing and using grain from a reliable
source.
5. Do not over-fi ll the hopper, it is easy to empty the fl our canister and continue
milling.
6. Do not mill damp, wet or oily grains.
7. Always clean the fi lter after milling by tapping out excess fl our.
8. All service and repairs must be done by an authorized service center. For service
information, see the warranty information on the last page of this manual.
Classic
14
Popular Accessories
Flour
Bagger
Exclusively for the NutriMill Classic Grain Mill
(Nutrimill Sold Separately)
Mill directly into the bag!
Accessory includes:
• Mill Adapter
• Bagging Ring
• Sample Bags
• Bag Support / Pail
Item # 760280
• Nutrimill milling module easily attaches
directly to the fl our bagger
• Mill grains directly into supplied freezer
safe bags without the mess
• BPA Free
• Saves time
• Easy solution for gifting
15
HOUSEHOLD USE ONLY
Contains No User Serviceable Parts
Please see the warranty information sheet included in the product
box for warranty details and information.
Circuit breaker protection: if the mill is overloaded, the
built-in circuit breaker may trip to protect against overheating.
The breaker is located on the bottom of the milling unit. Push the
button to reset.
If your mill is not functioning properly, contact our customer
service department at the number above.
MUZ 6 FW4
MUZ 6 DB2
batter whisks
stainless bowl
3
MUZ 6 ER2
MUZ 6 FS4
MUZ 6 BS1
bowl scraper
flour sifter
The world’s fi nest kitchen machine is the perfect companion for the
NutriMill. Both offer unequaled performance and craftsmanship making
food preparation more enjoyable.
Universal Plus
®
Features:
• 800 Watts
• 6 ½ quart bowl
• 4 speed settings and momentary switch
• Suction feet for greater stability
• Wide range of optional accessories
• Overload and start motor protection
• 3 year motor / transmission warranty
Classic
For additional service or operational information visit us at
www.lchef.com
or call us at 877.267.2434
KEEP DATED SALES RECEIPT FOR WARRANTY SERVICE
We suggest your staple your dated sales receipt to this booklet so you may
have information available should you need warranty service.
Purchase Receipt Date:____________________________________
Place of Purchase:________________________________________
Motor, Milling Heads, Electronics
- Limited Lifetime
Parts and Plastics
- 10 Years
Warranty Information
