Flocare Infi nity+
Short Manual
Preparation and start of the pump
Operating instructions
>
Open the pump door by pressing up on the lower wall (A) and rotating the door upwards (B) at the same time (fi g. 1).
>
Position the looped section of the silicone tubing around the rotor (fi g. 2).
>
Stretch slightly to seat the cassette into the pump (fi g. 3).
>
Close the pump door (fi g. 4).
>
The pump is now ready to be switched on.
1
2
3
4
5
Clearing pump
memory and priming
the feeding set
>
When switching the pump on or off, press this key for 2 seconds.
>
Pressing this key will clear the pump memory.
>
Pressing this key for 2 seconds will automatically prime the feeding set.
>
Connect the feeding set with the feeding tube and choose appropriate feeding program , or .
1
2
3
4
A
B
clr
fi ll set
1
2
3
Continuous
feeding
Continuous feeding
and pre-set dose
Bolus feeding
400 ml/h
1 ml/h
400 ml/h
1 ml/h
500 ml
1 ml
4000 ml
1 ml
12.00 h
0.30 h
4000 ml
1 ml
high (600 ml/hr)
low (400 ml/h)
>
>
>
>
>
>
>
>
>
>
>
>
>
>
1
2
3
ml/h
ml/h
bolus ml/int h
start/stop
start/stop
ml/h
start/stop
volume ml
bolus ml/int h
volume ml
+
+
+
+
+
+
+
–
–
–
–
–
–
–
