background image

L

E

N

cold switch

refrigeration

components

green

red

hot switch
heating thermostat

self-reset

electric heating pipe

overheat protector

hand-reset

www.NutriChefKitchen.com

CIRCUIT DIAGRAM

Attentions

1. Put the unit on the stable flat surface in 
     the cool dry room, escape from direct
     sunshine. Keep the unit at least 20 cm 
     away from the wall and no easy-burned
     articles near the dispenser. The unit is not 
     fit for using at outdoor or the place with
     water spray.
2. Moving models with compressor can’t 
     be put up and down or slope to 45°  for
     avoiding destruction or accident happening.
3. Pull out the plug and drain out the rest water
     if its not going to be used for a long time. 
     When the electric parts is working under 
     0 degree and cause ice jam, close cooling 
     switch for 4 hours and then it can be opened 
     for continuous working.
4. Do not start and stop the unit by inserting or 
     pulling out the plug. Don’t lengthen the 
     power cord to avoid fire.
5. For avoiding dry operation to destroy the 
    parts, please push the hot water faucet till 
    the water flow out, then start the power 
    and connect the heating switch.

www.NutriChefKitchen.com

3

Summary of Contents for PKTWC36SL









Reviews: