www.NutrichefKitchen.com
11
Programming the coffee volume.
1. Place an empty cup under the dispenser. For small cups, low down the
dispensing spout.
2. Raise the handle back completely
3. Insert capsule into the compartment gently.
4. Close the handle firmly to load the capsule.
5. Press the desired button and keep it pressed down, once the desired
volume has been reached, release the button, now the button is
reprogrammed.
6. After the programming, the size will be recorded in memory for next use,
by clicking the button normally (ie, press once.)
Do the same for other buttons if required.
Volume range:
25ml ~150ml based on Nespresso “Ristretto” capsule &
“lungo” capsule), default size is 25ml (short espresso), 40ml (normal
espresso), and 110ml (Lungo espresso).
Tips:
when programming process is finished, leave the machine for 30
seconds for cool down prior to open handle. The blinking frequence is 1
second 1 blink, hence, you can counter the blinking to know the brewing
time.
Be sure there is enough water in the tank before
programming coffee volume. Make sure the water tank
is in place before brewing. Because there is hot clean-
ing water come out during heating up.
CAUTION HOT WATER RISK OF SCALDING
Summary of Contents for PKNESPRESO60
Page 18: ......
