background image

IV. ELECTRIC DIAGRAM

(For PKCWC120, PKCWC150, PKCWC12, PKCWC15 only)

V. INSTRUCTION

Note:

  Position your wine cooler so that the plug is accessible

  Keep your wine cooler out of direct sunlight.

  Do not place next to heat generating appliance.

  Place the wine cooler on a leveled surface that is strong enough to support the unit when it is fully   

     loaded. To level your wine cooler, adjust the front feet located at the bottom of the unit.

Important:

  Position the cooler in a dry and airy place with ambient temperature between 5-32°C (41-90°F).

  Before connecting the unit to a power source, allow it stand upright for approximately 2 hours. This will  

     reduce the possibility of any system malfunctions which may have occurred from handing during 

     transportation.

  When positioning the wine cooler, 6 inches of space at the back and 10 inches of space both sides are  

     suggested. Do not put any objects on top of the unit which may block the air circulation.

Power Connection:

  This wine cooler should be properly grounded for your safety and in order to minimize the possibility of  

     electrical shock, the power cord of this unit is equipped with a 3-pin plug which fits with 3-pin wall    

     outlets.

  Never cut or remove the ground wire from the supplied power cord.

  The use of extension cords is not recommended.

  This unit requires a standard 110V-60Hz electrical outlet with a 3-pin plug.

  The cord should be secured behind the wine cooler. Also, to prevent accidental injury, do not expose or  

     dangle the cord.

VI. VENTILATION

 Do not install the wine cooler in a closed cabinet without proper ventilation.

 Please leave at least 6 inches distance between the wall and the wine cooler.

 Do not remove the feet of the wine cooler. Keep at least 50mm of ground clearance.

VII. CLEANING

 UNPLUG the Wine Chiller, and remove all items including shelves.

 Wash the inside surfaces with a warm water and baking soda solution. The solution should be about 2  

    tablespoons of baking soda to a quart of water.

 Wash the shelves with a mild detergent solution.

 Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts.

 Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a    

    clean soft cloth.

www.NutrichefKitchen.com

6

Summary of Contents for PKCWC12









Reviews: