NUTRICHEF PiCEM62, Instruction Manual, Page: 5 / 6

Real Time Setting: Press the SET button one time, hour blinking, press the
▲
button to set hour, press the
SET button one time, minutes flash, press the
▲
button to set minutes.
The timing for the machine start on time setting: press the SET button 3 times, hour blinking, press the
▲
button to set hour, press the SET button one time, minutes flash, press the
▲
button to set minutes;
Set the machine power off time: Press the SET button 5 times, hour blinking, press the
▲
button to set hour,
press the SET button one time, minutes flash, press the
▲
button to set minutes; The timer functions take
on use: Press
▲
to set timer, set the cycle timer function mode: time power on → me power o ff→ me o ff power
on and off, power on default time is 8:00, power off default time is 12:00.
VIII. Faults and Treatments
Faults Reason Treatment
WORK indicator is not light.
Power Source is not
switched on.
1.Check the power supply matches
2.Check the power cord is connected correctly
3. Internal components are damaged. Maintenance in
professional department.
ICE FULL indicator is light.
1. Ice fullness.
2.low ‐ temperature
protection
1. Remove the full Ice cube.
2.Move the Ice maker to a warmer place, where the
ambient temperature is higher than 5 degrees.
Malfunction indicator light flashes
Ice making box reset in
bad condition
1. Check whether any foreign body stuck the ice making
box.
2. Internal components are damaged. Maintenance in
professional department.
WATER absence indicator flashes Absence of water
1. Pour the storage room into clean water, push the key
to eliminate the failure.
2. water supply system or components damaged, send to
professional service department to maintenance
Ice making performance is not good.
1. Heat elimination is bad.
2. Water temperature is
too high.
3. Ambient temperature is
too high.
4. Refrigerant leaks.
1. Clean the dust on the cooling fan and air inlet/outlet
2. Fill normal temperature water.
3. Do not place the appliance in high temperature
conditions.
4. Refrigerating system is damaged. Maintenance in
professional department.
Abnormal noise Fan or pump is damaged.
1. Set up the appliance in right location.
2. Maintenance in professional department.