NUTRIBULLET NC-SPPR8, User Manual

Page: 26 / 52

Install and remove
float valve.
When pressure builds up inside your
cooker, the float valve pops up. This
indicates the cooker is pressurized
and prevents you from opening the
lid. When the cooker is depressurized,
the float valve drops down.
Note: Refer to Venting methods section of
this user guide to safely release pressure.
Remove:
Press the lid release button
and turn lid over. Detach the silicone
cap from the float valve and remove
float valve from top of lid.
Note: Always keep the float valve and
silicone cap in a secure place after
removing from the lid.
Clean float valve
to remove dried food debris after every
use to avoid clogging. The float valve and
silicone cap must be installed in the lid
before operating your cooker.
Install:
Insert float valve on the hole
located on top of the lid. Press the lid
release button and turn lid over. On
the bottom of lid, attach the silicone
cap to the float valve.
Note:
The float valve and silicone cap must
be installed in the lid before operating your
cooker.
Warning:
Never touch the float valve
while the cooker is pressurized to avoid burns.
24