background image

9

!

Save these 

instructions!

If you have any comments, 

questions, or concerns, please 

go to

 nutribullet.com. 

Or call 

customer service at:  

1 (800) 523-5993.

•  Always use genuine 

NutriBullet

®

 replacement 

parts. After market parts are 

not made to NutriBullet’s 

specifications and may 

damage your unit or cause 

serious injury. 

•  Periodically inspect all 

NutriBullet

®

 Smart Touch 

Blender™ Combo components 

for damage or wear that 

may impair proper function 

or present an electrical 

hazard. Make sure that the 

power cord and plug are 

undamaged. Discontinue 

use and replace blending 

vessels if you detect cracking, 

cloudiness, or damage to the 

plastic. Ensure that the blades 

rotate freely and that the 

structure is undamaged. Make 

sure that the motor base is 

unobstructed and clean. Follow 

maintenance recommended 

in the User Guide and never 

operate your NutriBullet

®

 with 

damaged components. If your 

NutriBullet

®

 malfunctions in any 

way, immediately discontinue 

use and contact customer 

service at 

1 (800) 523-5993

.  

You may purchase new 

NutriBullet

®

 cups, pitchers, 

and easy-twist extractor 

blades at 

nutribullet.com

 or by 

contacting customer service. 

Summary of Contents for NBF50520

































Reviews: