manualshive.com logo in svg

NUTRIBULLET IMMERSION BLENDER, User Manual

Share
Download
NUTRIBULLET IMMERSION BLENDER User Manual Download Page 7

7

allow cord to touch hot surfaces, 
including the stove.

Periodically inspect all 
NutriBullet

®

 components for 

damage or wear that may impair 
proper function or present an 
electrical hazard. Assure that 
the power cord and plug are 
undamaged. Discontinue use 
and replace NutriBullet

®

 cup if 

you detect cracking, crazing, 
cloudiness, or damage to the 
plastic. Assure that the blades 
rotate freely. Never operate 
your NutriBullet

®

 with damaged 

components. If your NutriBullet

®

 

malfunctions in any way, 
immediately discontinue use.

If the motor stops working and 
feels hot, unplug the appliance 
and let it cool for an hour before 
attempting to use it again. Your 
NutriBullet

®

 has an internal 

thermal breaker that shuts off 
the motor when it overheats. 
The thermal breaker will reset 
when the unit is unplugged and 
the thermal breaker cools down 
sufficiently.

CAUTION: In order to avoid 
a hazard due to inadvertent 
resetting of the thermal cut-
out, this appliance must not be 
supplied through an external 
switching device, such as a 
timer, or connected to a circuit 

that is regularly switched on and 
off by the utility

Never place your NutriBullet

®

 on 

top of flammable materials such 
as newspapers, tablecloths, 
napkins, dish towels, place 
mats, or other similar types of 
materials.

Do not place any NutriBullet

®

 

parts in the microwave or 
oven. Only the Blending Arm 
attachment or Whisk attachment 
may be immersed in liquid or 
used on the stove top, but always 
keep the motor body dry.

To avoid leakage or spillage,  
do not overfill the cup or bowl! 
DO NOT EXCEED THE MAX LINE.

Make sure to always allow 
room, at least 100mm, at the top 
of whatever container you are 
blending in. The blending action 
of the NutriBullet

®

 Immersion 

Blender requires space to 
blend, whisk, or chop effectively 
blending in a full container can 
result in leakage or spillage.

Remove whisk from the product 
before washing.

Periodically inspect all 
NutriBullet

®

 components for 

damage or wear that may impair 
proper function or present an 
electrical hazard. Make sure

Summary of Contents for IMMERSION BLENDER













































Reviews:

No comments

Brands by name

Popular brands

Load more brands