INSTALL FILTERS & LIGHT LENSES
1. The control pack requires two (2) filters (one in front and one in
back). Slide filters up into place and use filter tab to guide bot-
tom of filters into position.
2. Install two (2) light bulbs (100 W Max.) into the lamp sockets.
Insert glass light lenses into the openings by turning lenses
slightly to fit, then lowering lenses into position.
FILTER
TAB
FILTER
LIGHT
LENS
4
USE AND CARE
CONTROLS
This control pack uses solid state controls to operate an exterior
blower and cooktop lighting. Blower speed and lighting levels
can be infinitely adjusted from HIGH to LOW settings.
The exterior blower is operated using the “FAN” knob on the left.
Rotate knob clockwise to turn exterior blower ON HIGH. Further
clockwise rotation reduces blower speed. Turn blower OFF by
rotating knob counterclockwise until the control “clicks” off.
The built-in cooktop lights are operated using the “LIGHT” knob
on the right. Rotate knob clockwise to turn lights ON HIGH. Further
clockwise rotation reduces brightness. Turn lights OFF by rotating
knob counterclockwise until the control “clicks” off.
S O L I D S T A T E
F A N
L I G H T
HEAT SENTRY
The Heat Sentry is a thermostat located inside the switch tray at
the bottom of the housing. This thermostat prevents damage to
the control pack due to excessively high temperatures.
If the blower is OFF or the blower speed is too low, the Heat Sen-
try will sense excess heat from the cooktop. It then overrides the
current blower (FAN) setting and turns the blower ON HIGH until
the temperature is stabilized. When proper temperature is obtained,
the blower will return to its original setting.
It is recommended that the blower be turned up to a higher speed
setting while any high heat cooking is in progress.
CLEANING
Clean the control pack housing with a soft cloth and mild soap or
detergent only. DO NOT USE abrasive cloth, steel wool pads, or
scouring powders.
Filters may be removed and washed in the sink or dishwasher.
Glass light lenses can be wiped clean or removed and washed in
sink or dishwasher.
SERVICE PARTS
MODEL 329H CONTROL PACK
4
5
1
2
3
8
6
9
10
12
13
14
15
16
7
11
17
99043019A
KEY NO.
PART NO.
DESCRIPTION
1
97013418
Rough-in Plate
2
97002303
Hanger Strap (2 Req.)
3
99260491
Nut, Hanger Strap (4 Req.)
4
97002309
Housing Assembly
5
99010103
Aluminum Filter (2 Req.)
6
99050014
Light Lens (2 Req.)
7
--------
Tray Assembly, Top
8
--------
Tray Assembly, Bottom
9
--------
Screw, #8 x ¼ Hex Hd. SMS*
10
98003355
Switch Bracket
11
99270423
Light Socket (2 Req.)
12
99030296
Light Switch
13
97013416
Fan Switch
14
97005816
Heat Sentry Thermostat
15
99090632
Nameplate
16
99360119
Knob (2 Req.)
17
99770015
Cord
--
97005283
Tray Assembly, Complete
(includes Key Nos. 7 thru 17)
* Standard hardware - may be purchased locally.
Order replacement parts by “PART NO.” - not by “KEY NO.”
