Nussbaum UNI-LIFT 3200 NT Plus ND, Operating Instruction And Documentation

Page: 5 / 54

Operating Instruction and Documentation
UNI-LIFT 3500 NT ND/ UNI-LIFT 3200 NT Plus ND
- 5 -
After completely filling out this sheet including signatures, copy and return the
original to the manufacturer. The copy must remain in the manual.
Otto Nußbaum GmbH & Co. KG
Korker Straße 24
D-77694 Kehl-Bodersweier
Record of installation
The automotive lift with the
serial number:............................................ was installed on:...............................................
at the firm:................................................. at:.....................................................................
The initial safety check was carried out and the lift was started.
The installation was carried out by the operating authority/competent (please delete as applicable).
The initial safety check was carried out by a competent person before the initial operation.
The operating authority confirms the correct installation of the automotive lift, the competent person
confirms the correct initial operation.
Used Dowels(*):________________________________(Type/Name)
Minimum anchorage depth (*) kept: _________________mm
F
ok
Starting torque (*) kept: __________________________NM
F
ok
............................................ ..................................................... ............................................
date name of the operating authority signature of the operating authority
............................................ ..................................................... ............................................
date name of the competent person signature of the competent person
Your customer service:.....................................................................................................(stamp)
(*)
see supplement of the dowel manufacturers
Automotive Lift date: 12/2009 / Manual date: 10.12.2009