Nussbaum MCS 5500 ND WIRELESS, Operating Instruction

Page: 17 / 57

Operating Instruction and Documentation
MCS 5500 ND WIRELESS
- 17 -
• Observe the position of the wheels in the mobile column lift (see pic. 6 and 7).
Before lifting the load, lower the mobile-column-lift in the lowest position (remove the
shaft), otherwise a malfunction can lead it to damages.
• Connect or disconnect the columns (observe the sketch) only if the main switch is
switched off. Otherwise a malfunction can be occur.
• Check the dangerous places of the lift and be sure that there are no objects or people in
the immediate area of the lift or on the lift.
• Switch on the control system; Switch-on the main switch on position ”1” .
• Raise the vehicle. Use all columns. Press the buttons „1-4”, at the operating unit.
If the column is active, the switches of the chosen columns, are lighten.
• Lift the vehicle on the working height. Press the button „lifting“ .
• In the display of the operating unit you can read the momentary height of the supports.
• Observe the complete process.
It is only allowed to lift or to lower the column lift with load. Otherwise a column lift
without load can cause an unequal. After it, this column lift switch-off the complete
system.
Accordingly, the number of the lifting wheels must agree with the number of the
column lift. Please, switch off the column, which do you not need.
wrong Correct
pic. 6 pic. 7