Nussbaum BT 610, Operating Instructions Manual

Page: 70 / 96

70 26.11.07 1 689 979 924N
9.1 Entry of permissible total vehicle weight
Entry of towing vehicle or entire vehicle
Using the keys
G
(65) 0...9 and
E
(60),
enter the vehicle weight in kg.
Example: Total vehicle weight = 6,000 kg
G
6 0 0 0
E
9.2 Entry of calculation pressure (entire vehicle)
Using the keys P (63) 0...9 and E (60),
enter the calculation pressure of the axle.
. (61) is the decimal point for pressure values.
Example: Calculation pressure = 4.5 bars
P 4 . 5 E
9.3 Entry of calculation pressure for each axle
Using the keys
P
(63) 1...8
P
(63) 0...9 . and
E
(60),
enter the calculation pressure.
Example: Calculation pressure of axle 4 is 3.2 bars.
P
4
P
3 . 2 and
E
9.4 Distinguishing between towing vehicle/trailer
In order to distinguish between towing vehicle and trailer in the
logs, this can be selected by the following entry:
Keys F (53) 1 and E (60) .
This must be entered after the test of the final axle of the towing
vehicle (current axle becomes final axle of towing vehicle).
9.5 Allocation of the AUBS to the SBS and/or the PBS
9.5.1 Non-independent auxiliary braking system
Using the keys „ HBA “ (54) 1 or 2 (9) „ HBA “ (54) and „ 1..8 “
(61) „ BBA “ (53) or „ FBA “ (55) and „ ENTER “ (60), every
checked brake value can be assigned to any arbitrary
auxiliary braking system.
Example 1:
The SBS of axle 2 was tested.
The measuring values shall be allocated to the AUBS 2.
Press the keys „ HBA “ (54) 2 (9) „ HBA “ (54) and „ 2 “ (61)
„ BBA “ (53) and „ ENTER “ (60).
Example 2:
The PBS of the axle 3 was tested.
The measuring values shall be allocated to the AUBS 1.
Press the keys „ HBA “ (54) 1 (9) „ HBA “ (54) and „ 3 “ (61)
„ FBA “ (55) and „ ENTER “ (60).
9.5.2 Independent auxiliary braking system
Using the keys
f
(54) 1 (or 2)
f
(54) and
E
(60),
the next tested axle of the auxiliary braking system AUBS 1
(or 2) is allocated. Further axes are also allocated to the
selected AUBS, until a change-over to the SBS or PBS is
carried out.
Example:
Changing over to independent auxiliary braking system, for in-
stance AUBS1
Press the keys
f
(54) 1
f
(54) and
E
(60).
Change-over to SBS
Press the key
F
(53).
9.6 Change-over of pressure display
By means of the keys
P
(63) and
U
(62)
the pressures pm and pz are displayed.