nusantara TEAK Skyweaver Air Chair Assembly Instructions Download Page 3

Page: 3 / 3

Tie the rope or chain that you wish to hang the chair from in the stainless steel

ring. A carabineer or snap hook is recommended, but not required. (not

included) Lift the chair from the ring and pull the chair to the desired height.

Fasten the Sunbrella cushion in the desired position.

Adjust the Sitting Position

Chair Position –

Sit with your feet flat on the ground, as you would any regular chair.

This position you will want to move the cushion lower to your head level.

Lounge Position

– Raise your feet so they are resting on the bottom spreader bar of the

chair. Raise your arms, and grab the thick ropes. Pull the ropes, while at the same time

extending your legs. This will shift your body up, and back into the lounge position.

Reclined Position –

Reach above and grab the thick ropes behind the knots and

galvanized rope thimbles. Pull hard down each side one at a time, until the rope slides

through the rope thimble and stops at the front stop knot. This will recline the chair. To

return to the lounge position pull the front ropes down and lean forward until the rope

slides to the rear stop knot.

Summary of Contents for Skyweaver Air Chair

Page 1: ...hat can support the maximum load safely 250kg 550lbs The Skyweaver Double can accommodate two people The Single Skyweaver is designed for single occupancy To reduce weathering set up in a shaded area...

Page 2: ...nd of the arms all the way down the rope to the bottom of the chair 3 The open ends of the arms should be at the top of the chair with the long ropes balls and logo The arms should be positioned under...

Page 3: ...ower to your head level Lounge Position Raise your feet so they are resting on the bottom spreader bar of the chair Raise your arms and grab the thick ropes Pull the ropes while at the same time exten...