Roman Arch Hammock Stand Assembly Instructions
1.
EYE BOLTS
(2 Eye Bolts, 2 Washers, 2 Nuts)
•
Fix the eye bolts to each wooden segment
that has a center hole where there is a
logo cap.
•
Use a washer on the front and rear end of
the bolt. The rear washer fits into the
countersunk hole.
•
These will be the center segments
2.
MAKING THE ARCH
(4 Long Bolts, 8 Washers, 8 Nuts)
•
Align the 2 base segments side by
side, leaving enough space for the
center segments in between
•
Place a center segment in between
the base segments and align the
side holes
•
Ensure that the countersunk holes
are on the outside to fit the
washer and nuts
•
Place a nut and washer on one end
of the 4 long bolts, and pass the
long bolt through the side of all
three segments
•
Place a washer and nut on the
other end of the bolt, and repeat
this step with the remaining holes.
•
Once all 4 bolts and nuts are
secured, tighten all nuts on the
bolts with a 13mm socket.
