2.
Use an Allan Key to unlock the bolts. The bolt has 3 pieces.
•
Outer sheath
•
Plastic Washer
•
Male end screw
3.
Locate the holes on the legs of the Kono Deck Lounger.
4.
Insert the outer sheath of the bolt from the bottom so that the sheath protrudes the hole,
and place the plastic washer in over the sheath to keep it in place.
5.
Slide the legs so that the holes align and insert the outer sheath through both holes,
keeping the plastic washer in place. Insert the male end screw through the top hole, and
tighten with an allan key tool.
6. Repeat the same on the other leg
.
