32
September 2019
Installing and cleaning the dust filter
We recommend cleaning the filter annually. If you are operating the projector in a dusty environment, we
recommend cleaning the filter after every 2,500 hours of use.
New filters can be ordered via
using the service part number SRV-FILTER.
Before you begin, turn the projector off and unplug the power cord.
1.
Pull the dust filter container out from the projector
2.
Carefully remove the dust filter from the dust filter container
3.
Either clean the filter or replace it with a new filter
4.
Put the dust filter container back inside the projector and press the power button to turn the
projector on
5.
Press the menu button to enter the OSD, select the options menu and use the Filters Remind
option to reset the counter
