NuPrime
9
Mono Connection:
1.
Choose either RCA or XLR connection and
make sure the switch is properly selected.
2.
Be sure the switch is selected to Mono.
3.
Be sure the cables are securely connected to
the desire input connectors. Please connect to the
connectors in white color. Gray
connectors do not work in Mono mode.
4.
Connect the speaker cables to output
terminals.
Note: Please connect to the speaker terminal in white color. The left is positive and right is
negative speaker. Gray terminals do not work in Mono mode.
Trigger In:
When in use, front panel and remote control power buttons are disabled. Power control only
available via Preamp stage.
Front Panel View
1.
Standby indicator light: Red light indicates the unit is on standby. Green light indicates the unit is
power on. Light off indicates the unit is power off.
2.
IR receiver: Accepting remote control signal.
3.
4 set of Stereo channel indicator light: Red indicates the input signal is from XLR. Green indicates the
input signal is from RCA. Light off indicates the channel is turn off or in full bridged mode.
4.
4 set of Mono channel indicator light: Red indicates the input signal is from XLR. Green indicates the
input signal is from RCA
Summary of Contents for MCH-K38
Page 1: ...NuPrime MCH K38 ...
