20
Default sample rate is shown on display if SRC is set to OFF. Otherwise, the set SRC sample rate is shown.
If no USB source is connected to CDP-9 and no SRC is set. Only the volume is displayed. Sample rate will be blank.
To run the NuPrime CDP-9 USB DAC on Mac– PCM:
1. Power on NuPrime CDP-9, select USB input. The device will enumerate as a USB Audio device on your Mac.
2. In Audio Midi Setup, select the “NuPrime CDP-9” device as your default Input and Output device.
3. The sample rate of the device can be selected using the drop down menu.
4. The audio is also output over SPDIF.
To run the NuPrime CDP-9 USB DAC on Mac– DSD:
1. Install playback software on MAC.
Ex: Audirvana 15 days free http://audirvana.com/site/?page_id=112
2. In Preferences Setup, Audio System selects the “NuPrime CDP-9” as your Default Device.
3. The Native DSD Capability select the “DSD Over PCM standard 1.0”
4. SPDIF output is not working on DSD playback.
To run the NuPrime CDP-9 USB DAC on Windows – PCM:
1. Please visit www.nuprimeaudio.com and download the latest driver.
2. Connect computer to USB DAC and power on NuPrime CDP-9, select USB DAC input.
The device will enumerate as a USB Audio device on your PC.
3. Install the latest driver just download via NuPrime website.
4. In Control Panel->Sound, select “NuPrime CDP-9” as your Default Device.
To run the NuPrime CDP-9 USB DAC on Windows – DSD:
Install playback software on Windows
1. Install the Foobar media player ( http://www.foobar2000.org/download )
