background image

Read all instructions carefully before using your Bottle Warmer Active 
For use by adults for intended purposes only. Keep out of the reach of
children.
Please inspect the product before each use and please clean the
product before first use.
Do not use scouring pads, abrasives or solvents for cleaning; they may
damage the appliance and its surface.
To protect against electric shock, do not immerse the warmer base,
cord in water or any liquid.  
Do not expose the product to direct sunshine, heat or hot
environment. 
Do not place near a hot gas or electric burner, or in a heated oven.
The warming plate may become hot. Do not touch while in use and let
cool before handling. 
It is recommended to use 5V/3A charger or 5V/3A power bank.
Do not use this product to heat frozen baby bottles.
Please unplug the product when it is not in use and before cleaning.
Allow warmer to cool before putting on or taking off parts and
cleaning.
Do not charge for a long time in case of fire or other accidents.

When using electrical appliances, basic safety precautions should always be
followed, including the following: 

       Appliances can still be used by persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the appliance in a
safe way and understand the hazards involved.

IMPORTANT

www.nupeaa.com

WARNING: Keep out of reach of
children.

Summary of Contents for Bottle Warmer Active













Reviews: