Nuovo
Operating instructions for use
EASY-PRINT Sprinter R5/R6, Series 10
5
6 User manual
6.1
Machine description
The picture below shows the EASY-PRINT.
6.2 Power on / Power off
Advice
To turn off the machine, close the protective cover [OFF] and then turn off the machine using the power switch.
The protective cover must be closed [OFF] to operate the machine. If the power switch is turned on with the
protective cover open [ON] the machine will not operate and the green LED will not illuminate. To activate the
machine close [OFF] the protective cover and reopen again [ON].
As soon as the safety-lid [5] is opened the machine automatically stops.
5
7
1
6
4
2
1. Power switch
2. Lever for opening and closing the protective cover (sealing off lid)
3. Ink-reservoir with rubber stamping pad
4. Inch button for single stroke
5. Safety-Lid
6. Rubber spring
7. Stamping bar
1
2
5
3
7
1. Power switch.
2. Open the protective cover. [ON]
The machine will make a single stroke.
3. Clean the rubber ink pads and the
protective cover with a paper tissue.