Nuova MICROBAR User Manual Download Page 16

44

1.

CUMULATIVE TOTAL

The submenus can be entered by pus-
hing the 

ENTER

key.

The quantity of doses delivered for each
kind of beverage will be displayed.

1

Total Ristretto

2

Total 2 Ristretto

3

Total Espresso

4

Total 2 Espresso

5

Total Cafee

6

Total 2 Cafee

7

Total Cafecream

8

Total Latte

9

Total Caffelatte

10 Total Macchiato
11 Total Cappuccino
12 Total Big Cappuccino
13 Total Deca
14 Total Cleaning
15 Total Litres

The arrow keys 

▲▼ 

scroll all the totals of the

various beverages.
The 

RESET

key moves back to the preceding

menu.

Per azzerare i conteggi, premere contempora-
neamente i tasti 

▲▼

.

The display will read “Counters reset”.

To exit programming sites, proceed as follows:

NOTE

: can be performed with machine on and

from any of the visualized functions. 

• Insert the key into the appropriate lock.
• Turn the control panel hatch key counter-

clockwise.

• Open the control panel hatch; the display

will read:

• Close the front panel and turn the key clock-

wise. The display will read:

• The unit will enter resting phase position

and the display will read:

• The machine is now ready to deliver the

desired beverages with its new memorized
setting. Alternatively scroll all the functions
by pushing the arrow keys 

▼ 

until the dis-

play reads:

2.

PRODUCT NAME:

By pressing the 

ENTER

key, the subme-

nus can be accessed.
A beverage is assigned to each key.

Example:

In this case the beverage ‘Espresso’ is assi-
gned to key number. 

The arrow keys 

▲▼ 

scroll the names of the

beverages on each key available in the agenda.
The 

RESET

key is for exiting the submenu.

The 

ENTER

key confirms the type of beverage

for the key 

number

being taken into considera-

tion, and then passes on to the beverage of the
next key.
The programmable keys are the following:

Once the programming of the final key has
been completed, you pass on to the next menu
item.

NOTA: 

The keys
can be programmed for both milk-
based and coffee drinks.

The keys
can be programmed exclusively for cof-
fee drinks.

1

3

2

4

6

2

6

4

1

3

7.3

EXITING
PROGRAMMING

7.4

PROGRAMMING CYCLE

1

ENGLISH

Summary of Contents for MICROBAR





























Reviews: