background image

7

ENGLISH

CARE AND CLEANING / STORAGE

DO NOT use any sharp or pointed articles for cleaning the inside, as this will damage the laminator. 
Since deposits or residue will influence the laminating results, periodically clean the rollers after use. 

While “ON”, insert a folded letter-sized paper into the entrance of laminator. The paper will roll out 

with any present residue. Repeat several times to completely clean the rollers. If the item being lami-

nated is jammed, turn off and unplug the machine and refer to “JAM RELEASE LEVER” in the Opera

-

tions portion of this user manual.

 STORAGE

Always unplug the laminator from its outlet when not in use. Allow the laminator to completely cool 
before storing. Store the laminator in a dry area. Never wrap the cord around the laminator since this 
will contribute to the wear on the cord. Do not place heavy items on top of the laminator, which may 
result in possible damage. 

• 

Do not spray or keep any aerosol products 

in or around laminator. 

• 

DO NOT USE CANNED AIR ON LAMINATOR.

Don't/Caution:

DO NOT USE

AEROSOL PRODUCTS!

 TO DUST / CLEAN THE LAMINATOR:

Always 

UNPLUG 

the 

laminator first.

Take a soft dry cloth and 

wipe the laminator body.

Do not clean the laminator with spray 

or liquid cleaners or water. Do not im

-

merse the laminator in water. 

Summary of Contents for LM990HC











Reviews: