manualshive.com logo in svg

Nuova Simonelli Oscar II, Service Manual

Share
Download
Nuova Simonelli Oscar II Service Manual Download Page 20

2.3 

PrOGraMMinG DOSeS

Carry out the following operations to enter into 
programming mode:

nOTe

Operation to be carried out with the machine 
switched on.

To enter into programming mode, press the 
two coffee dispensing button for 5 seconds.
The dispensing buttons start to flash.

nOTe

After 30 seconds of inactivity (no buttons pressed) 
in programming mode, the machine returns to 
normal mode and no data is memorised. 

To programme the dose of water relative to one of the 

 dispensing buttons, proceed as follows: 

Fill the filter holder with the correct dose of coffee (the 
filter holder can be single or double depending on the 
button to be programmed).
Place the filter holder into the unit.
Press one of the dispensing buttons.

Dispensing starts; once the desired quantity has been 
reached press the same button again.

To exit from the programming mode and memorise 

the desired doses, keep the 

 button pressed for 

at least 5 seconds; the buttons stop flashing.

PrOGraMMinG cOFFee DOSeS

Ed. 02 of 09/2016

2.6

Service Manual

Fig. 18

Fig. 19

AUTORYZOWANY DYSTRYBUTOR

w w w . s i m o n e l l i g r o u p . p l

Summary of Contents for Oscar II





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands