background image

Child Restraint Installation

Vehicle Seat Belt 
1  

-  You may need to loosen tether adjuster before unclipping from anchor. Unclip the 

tether hook by pushing in the back of the hook while pulling the hook down and off of 

the anchor.

-  Place child restraint on selected vehicle seat. Press the recline button and put the seat 

in the most upright position. 

-  Place child restraint forward facing in a compatible vehicle seat (p. 12). With the 

bottom of the child restraint parallel to the vehicle seat bottom, slide the seat back 

until the handle of the child restraint contacts the vehicle seat back.

-  Rotate the seat rear facing to access True Tension

 door. 

- Route the tether hook over the handle and attach to the vehicle tether anchor. Do not 

tighten the strap yet.

-  Open the True Tension

 door.  

 

1

5

6

rear

 facing

5   4   3   2   1

1    2   3   4   5

forw

ard f

acing

forward facing

5   4   3   2   1 1    2   3   4   5

rear facing

2

rear

 facing

5   4   3   2   1

1    2   3   4   5

forw

ard f

acing

Complete installation using your vehicle's Lap/Shoulder belt (p.44), a compatible vehicle 

Lap belt only (p. 46), or the Lower Anchor belt (p. 50)

42

REVV

 instructions

   43

REVV

 instructions

3

4

Summary of Contents for revv





































Reviews: