Nuna Cari next, Manual

Page: 10 / 205

8 7 CARI next instruction
CARI next instruction
EN EN
Parts List
Make sure all parts are available before assembly. If any part is missing,
please contact local retailer. No tools are required for assembly.
1 Handle
2 Dream Drape™
3
Carry Cot Cover (style may vary)
4 Adjustment Webbing
5 Webbing Adjustment Button
6 Handle Adjustment Button
7
Carry Cot Release Button
(from stroller)
8 Infant Insert
9 Buckle
10
Shoulder Harness Covers
11 Instruction Manual Storage
Compartment
12 Crotch Harness Cover
13 Mattress Pad
14
Accessory Bag
(maximum load = 0.45kg)
3
1
2
6
4
5
7
8
10
9
12
14
13
11
Product Set Up
Installation Concerns
This enhanced child restraint system is only suitable for vehicle seats
equipped with ISOFIX anchorage bars.
(1)
DO NOT install this enhanced child restraint on vehicle seats that face
sideways or rearward with respect to the moving direction of the vehicle.
Please refer to your vehicle owner’s manual for recommended or suggested
installation positions. (2)
This enhanced child restraint must be installed on the rear vehicle seat. (3)
DO NOT
install this enhanced child restraint on movable vehicle seats during
installation.
Product Use
Base Installation
1
- Attach the ISOFIX guides to the vehicle's ISOFIX anchor bars (see vehicle
owner's manual). (4) The ISOFIX guides can protect the surface of the
vehicle seat from being torn. They can also guide the ISOFIX connectors.
2
- Unfold the load leg from storage compartment. (5)
3
- Extend the ISOFIX connectors by pressing the ISOFIX adjustment button
while pulling on the connector. (6)
4
- Press the ISOFIX adjustment button to adjust the ISOFIX connectors.
Line up the ISOFIX connectors with the ISOFIX guides, and then click
both ISOFIX connectors into the ISOFIX anchor bars. (7)
Make sure that both ISOFIX connectors are securely attached to the
vehicle's ISOFIX anchor bars. There should be two audible clicks and the
colors of the indicators on both ISOFIX connectors should be completely
green. (7)-1
Check to make sure the base is securely installed by pulling on both
ISOFIX connectors.