Indice A
62/168
The Time Lapse default settings are the following:
•
Block of time: 19:00 to 07:00 the next day
•
Time Out: 60 seconds
•
Image resolution: 8MP
•
Burst mode: 1 image per trigger
Outside of the Time Lapse time frame, the camera will follow
the user defined PIR settings.
First, you have to set the start and stop times for the time frame
(for example 19:00 to 07:00 the next day). And then you have to
set the interval of time between each still image. The camera
will remain in Time Lapse mode until you change the program
setting. The image resolution and burst number are the same as
in PIR mode.
•
Slide the switch to the
TEST
position from
OFF
, the status
display will show the camera current status.
•
Press the
[M]
button once to enter the programming
mode, the word
“PIR”
or
“TLS”
will be
blinking.
•
Press the DOWN
[
▼
]
button until you
see the word
“TLS”
blinking.
•
Press
[M]
to confirm.
•
The display will show
T
+
S 88:88
(S = Start, 88:88 = time in HH:MM).
You can adjust the start time from
00:00 to 23:59.
•
Press
[M]
to enter the “Start Time”
setting.
