Num'axes iki sonic, User Manual

Page: 13 / 48

7
8
8
8
8
9
9
9
0
0
0
re
ty
ur
ve
p it
Description of the product
Fitting the battery
- Remove the screws from the battery cover with a screwdriver.
- Remove the battery cover.
- Insert the 3 Volt CR 2450 lithium battery as indicated under the battery holder (See diagram 2).
- A beep sound is emitted indicating that the battery was properly inserted. If you do not hear
Gb - 13
As soon as your dog stops barking,
congratulate him
(but not excessively) by
stroking him, verbally flattering him, or giving
him dry food so as to encourage him to behave
himself.
Remember that barking can indicate some
behavioral problems. The bark limiter collar
will allow you to resolve problems caused by
excessive barking.
Package contents
- collar equipped with a short bark sensor
- nylon strap
- 3 Volt CR 2450 lithium battery
- magnetic key (magnet)
- long bark sensor
- small plastic screwdriver
- this user's manual
Diagram 2
« + » terminal of
the battery
downward
Diagram 3
Put the battery
cover back in
place taking care
to insert first the
little pin at the
bottom of the
battery cover
Sensor
(short or long)
Orange mark:
Area where the magnet is located
to switch On/Off or change mode
Diagram 1
Nylon strap