Num'axes Canicom 700, User Manual

Page: 21 / 64

« Booster » button configuration:
- select the stimulation level 01
- press the ”-“ button until the stimulation level flashes on the LCD screen
- press the ”+“ or ”-“ button to modify the stimulation level
- press the « Booster » button to confirm the level selected
« + » and « - » : stimulation level control buttons
Use the “+”/”-“ buttons for rapid adjustment of the stimulation level of the receiver collar.
15 levels are available.
Level 1: very weak stimulation. Level 15: strong stimulation.
Always start with the lowest level of stimulation.
Retro-lightning of the LCD screen
You can light the LCD screen for approximately 6 seconds by pressing briefly the On/off switch ( ).
Checking/replacing battery of remote control
Performance (radio range) of the remote control may deteriorate as battery becomes weak. Be
prepared to replace the battery
.
To check the condition of the battery, turn on the remote control and look at the battery level indicator
on the LCD screen.
Battery fully charged.
Weak battery: prepare to replace the battery.
Dead battery: your CANICOM 700 functions
in safety mode and the system locks up.
The battery must be replaced.
Remove the old battery and replace it with a new one :
- On the back of the remote control, unscrew the screw
and remove the battery cover.
- Remove the old battery.
- Insert the new battery (3-V lithium CR 2)
paying attention
to follow polarity indicated on the battery housing.
(ref. Diagram 6).
- Put the battery cover back in place.
- Retighten the screw.
- Check the remote control operates correctly.
Gb - 21
Diagram. 6
Replacing battery
of CANICOM 700
WARNING
Make sure the polarity is correct