Gb - 21
v
« + » and « - » : stimulation level control buttons
Use the “+”/”-“ buttons for rapid adjustment of the stimulation level of the receiver collar.
9 levels are available.
Level 1: very weak stimulation. Level 9: strong stimulation.
Always start with the lowest level of stimulation.
Checking/replacing battery of remote control
Performance (radio range) of the remote control may deteriorate as battery becomes weak. Be
prepared to replace the battery
.
To check the condition of the battery, turn on the remote control and look at the battery level indicator on
the LCD screen. The symbols which appear indicate the following:
Battery fully charged.
Weak battery: prepare to replace the battery.
Dead battery: your CANICOM 250S functions in safety mode and the system locks up. The
battery must be replaced.
Replace the old battery with a new one as follows:
- On the back of the remote control, unscrew the screw and remove the battery cover.
- Remove the old battery.
- Insert the new battery (3-V lithium CR 2430) making
sure the polarity “+” noted on the battery is
visible
(ref. Diagram 6).
- Put the battery cover back in place.
- Retighten the screw.
- Check the remote control operates correctly.
« + » of the battery
must be visible
Diagram 6
CANICOM 250S_Indice A_CANICOM 200 18/01/2021 11:51 Page21
