Wipe the machine completely clean. The vacuum hose and any accessories
should be sealed in a separate plastic bag and retained for future use (or
disposed in a means appropriate to the material collected).
VACUUM CLEANER TECHNICAL INFORMATION:
MODEL:
HZC 390 L
POWER SUPPLY:
50-60Hz, 110v, Class I
CURRENT (CLEAN):
8A @ 110v, 1000W
SOUND PRESSURE:
< 70 dB(A) +/- 0.5 dB(A)
MAXIMUM SUCTION:
2500mm w.g. (248hPa)
NORMAL AIRFLOW (CLEAN): 48L/sec (152m3/hr)
LOW FLOW WARNING @:
<20L/sec (72m3/hr)
DIMENSIONS mm:
450L x 400W x 690 H (or 1010 with handle up)
WEIGHT:
13 KG
CARTRIDGE:
13 LITRES
DO:
Take precautions to prevent spread of dust.
Ask if you need advice.
Keep the machine clean.
Keep vacuum hoses and tubes clear.
Regularly examine the power cable for damage.
Dispose of vacuum hoses & tools responsibly once you have finished.
DO NOT:
Use steam cleaners or pressure washers to clean the machine.
Immerse in water for cleaning.
Attempt to repair the machine if it is faulty – return to the supplier.
Use the machine to suck up water or liquid of any description.
Use the machine to suck up hot ashes, or lighted cigarette ends.
Run the machine over the power cable during operation.
THE FOLLOWING MUST BE OBSERVED AT ALL TIMES
USERS MUST:
refer to local safety regulations applicable to the materials being collected by the vacuum machine
[for example, in the U.K. if collecting dust containing lead observe the requirements of the Control of
Lead at Work Regulations and supporting guidance L132; if collecting dust containing asbestos
observe the requirements of the Control of Asbestos Regulations 2012, its supporting guidance ACoP
L143 Managing and Working with Asbestos, and the HSE’s Equipment and Method task sheet EM4:
Using a Type-H Vacuum Cleaner for Asbestos].
familiarise themselves with instruction and information (and where appropriate undertake training)
concerning use of the appliance, the substances for which it is to be used, including the methods for
handling material collected.
Not attempt to take apart or open the vacuum (other than to connect a vacuum hose).
Before removing the vacuum from a potentially contaminated area ensure that the outside of the
appliance is decontaminated by vacuum cleaning, the dust cap is secured, and the machine is wiped
completely clean. Place the equipment within a clear polythene bag prior to return.
Accessories such as flexible hoses, brushes, tools etc. should be considered contaminated after first
use and should be sealed in polythene bags between each subsequent use; they cannot be returned to
the supplier. When ultimately finished with these accessories should be disposed of in accordance
with the regulations for the waste material you are handling.
FOR MORE INFORMATION ABOUT OUR RANGE OF HIRE EQUIPMENT PLEASE SEE OUR WEBSITE
www.envirogard.co.uk
Page 2 of 2 Ref. EVGD280322