24
ALWAYS ENSURE THAT THE BATTERY IS DISCONNECTED
BEFORE MAKING ANY ADJUSTMENTS
!
!
Fitting the brushes
Featuring the Nulock brush system.
!"#$%%&
The Pad is retained using Numatic’s own PadLoc system. (Ask your supplier for details)
Only use manufacturer supplied brushes / pads.
TTB 4045 / ETB 4045 requires a 450mm brush or a 400mm pad.
TTB 4055 requires a 550mm brush or a 500mm pad
Safety gloves are recommended for the changing of used brushes.
Machine Set-Up
Fit the brush /pad to the drive chuck,
twist to lock the brush
(Fig 14) / pad in place (Fig 15).
Tipping the Brush Deck
To tip the deck into the down position (Operating mode) Press in the brush
deck locking bar (Fig 16) and rotate the brush deck (Fig 17).
Fig 15
Fig 17
Fig 16
Fig 14
To change to brush deck up position, (Transit mode) simply lift the deck
and the sprung loaded locking bar will active to hold the deck up.
