Numatic CV 570, Owner'S Instructions Manual

Page: 10 / 16

Fault Finding
If the vacuum cleaner stops working switch off and remove the plug from the wall before investigating where the
fault lies.
If the vacuum cleaner has a blockage and will not pick up material, switch off and remove the plug from the wall.
Check if the float valve has operated, this will shut off the suction and the pitch of the vacuum motor will change.
Remove the power head and float cage and empty the waste out of the container, if the container is empty check
that the floor tool, wands and hose are not blocked.
After use always inspect the machine for damage.
Spare Parts
NUMBER ITEM NOTES
207124 CARTRIDGE FILTER REPLACEMENT ITEM
207125 (H10)CARTRIDGE FILTER ACCESSORY ITEM
207126 MESH FILTER REPLACEMENT ITEM
502988 FLOAT ASSEMBLY REPLACEMENT ITEM