Numatic CRO 8055/100T, Owner'S Instructions Manual, Page: 9 / 28

9
To lower the brush deck slide the brush deck foot pedal forward with your foot (Fig.14) and gently release the foot
pedal (Fig.15). The brush deck is now in the lowered position.
To raise the brush deck slowly depress the foot pedal, ensuring it is in the forward position (Fig.16) and slide your foot
back to lock the pedal in place (Fig.17).
The brush deck is now in the raised position.
Make sure the brush deck is in the raised position (see above) and place the brush under the brush deck (Fig.18)
ensuring it is central to the chuck (Fig.19), then lower the brush deck (see above).
Turn on the machine by inserting the key and turning a quarter-turn clockwise.
Press the brush engage button and the machine will pick up the brush (Fig.21).
Turn off the machine by turning the key a quarter-turn anti clockwise.
To disengage the brush press the brush engage button with the brush deck in the raised position.
Note: Do not lift the brush deck until the brush has stopped revolving or the brush will release.
Make sure you raise the brush deck before driving to the cleaning site.
Safety Gloves are recommended for the changing of used Brushes.
!
!
Always ensure that the machine is switched off before making any adjustments
!
!
When in transit, the Floor-tool can be placed on the bracket
at the rear of the machine.
Simply slot the retaining knob into the bracket.
14 15 16 17
18 19 20 21
Machine Set-Up
Raise / Lower the Brush Deck
Fitting the Brush
Floor-tool Transit Bracket