6
6.
Party Lights Mode:
Press this button to cycle between the different lighting modes for the
speaker Party Lights:
•
EQ Bars (reactive to music)
•
Vertical Lights Wipe (non-reactive to music)
•
Diagonal Lights Wipe (non-reactive to music)
•
Vertical Lights Scrolling (non-reactive to music)
•
Snowflake/Square Lights (non-reactive to music)
•
Moving Block Bar (reactive to music)
•
Pulsating Block (reactive to music)
•
Horizontal Pulsating Bar (reactive to music)
•
Diagonal with Changing Colors (reactive to music)
•
Cross with Changing Colors (reactive to music)
•
Solid Color (reactive to music)
•
Pulsating Block with Spinning Block (reactive to music)
•
Snowflake/Square Lights Fill (non-reactive to music)
•
Spinning Crosses and Expanding Square (non-reactive to music)
•
Vertical Pulsating Bar (reactive to music)
•
Moving Diagonal (non-reactive to music)
•
Off (no lights)
Press and hold this button for 3 seconds to disable the sound-reactive dome lights. Press
and hold this button for 6 seconds to disable all lights.
7.
Master Volume:
This adjusts the speaker’s main mix volume, which includes USB,
Auxiliary Input, and the audio of a paired Bluetooth device.
8.
Mic Volume:
Adjusts the volume of the
Mic Input
.
9.
Browse Knob:
Rotate this knob to cycle through folders and tracks. Press it to move
forward in the software panels.
10.
Load:
Press one of these buttons while a track is selected to assign it to Deck A or B,
respectively, in the software.
11.
Master Gain:
Adjusts the master volume in the software.
12.
Cue Mix:
Adjusts the software’s audio output to the headphones, mixing between the cue
output and the master mix output.
13.
Cue Gain:
Adjusts the volume for headphone cueing in the software.
14.
Gain:
Adjusts the
pre-fader, pre-EQ audio level of the corresponding channel in the
software.
15.
High EQ:
Controls the treble frequencies for the individual channels.
16.
Low EQ:
Controls the bass frequencies for the individual channels.
17.
Channel Volume:
Adjusts the volume of the individual channels in the software.
18.
Crossfader:
Controls the blend between the two decks.
19.
PFL/Cue:
Press this button to send this channel's pre-fader signal to the Cue Channel for
monitoring. When engaged, the button will be lit. By pressing one PFL button at a time,
you will cue that channel alone (and deactivate PFL monitoring for the other channels). To
cue to multiple channels simultaneously, press the PFL buttons for those channels at the
same time.
