Numark MIXTRACK PLATINUM FX, Manual

Page: 6 / 15

16. Pitch Bend Down:
Press and hold to momentarily reduce the speed of
the track.
Pitch Range
Hold Shift and this button to
adjust.
17. Pitch Bend Up:
Press and hold to momentarily increase the speed
of the track.
Keylock
Hold Shift and this button to
activate
18. Pitch Fader:
This controls the speed of the music. Moving
towards the "+" will speed the music up, while
moving towards the "
– " will slow it down.
19. Beats Multiplier:
Increases and decreases the rate of the effects to
the beat. When using a time-based effect, this knob
adjusts its time division.
FX Macros
Selects and controls FX Macros
parameters.
20. FX Wet/Dry Knob:
Turn this knob to adjust the wet/dry mix of the
effects.
21. Software FX:
Press one of these buttons to select a software
effect. • HPF (High pass filter) • LPF (Low pass
filter) • Flanger • Echo • Reverb • Phaser
Multiple FX (at once)
Hold shift and select multiple FX
buttons to be active at once.
22. FX Toggle On / Off:
Push up on the toggle switch to latch (lock) the FX
in the on position. Push down on the toggle switch
to turn the FX on momentarily. When the toggle
switch is in the middle position, the FX will be off.
23. Tap BPM:
Press this a minimum of 4 times to manually enter a
new BPM. The software will ignore the track's BPM
and follow your manually entered tempo.
Default Tempo Reset:
Press Shift and this button to
reset the tempo to the track to
default BPM.