DM1090X
- The Leader in DJ Technology
©1999
Industries
- 5 -
http://www.numark.com
QUICK SETUP DIAGRAM
Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all stereo
input sources. Next, connect your microphone(s) and monitor headphones. Finally, connect the stereo outputs to
the power amplifier(s) and/or audio sources. Plug your mixer into AC power. Now you are ready to switch
everything on. Always switch on your audio input sources such as turntables or CD players first, then your mixer,
and finally any amplifiers. When turning off, always reverse this operation by turning off amplifiers, then your
mixer, and then input devices.
SPECIFICATIONS
INPUTS:
Line:
10k
Ω
input impedance
90mV rms sensitivity (for 1.22V output)
Mic:
10k
Ω
input impedance unbalanced
2 mV rms sensitivity (for 1.22V output)
78mV rms max input
Phono: 47k
Ω
input impedance
1.8mV rms sensitivity @ 1 KHz
(for 1.22V output)
OUTPUTS:
Line:
9V rms max
Headphone Amp: 0.5 watt into 47
Ω
Distortion
less than 0.01%
SIGNAL TO NOISE RATIOS* (vs. maximum output):
Line:
Better than 96 dB
Mic:
Better than 78 dB
Phono:
Better than 87 dB
*JIS - weighted
FREQUENCY RESPONSE:
Line:
20 Hz- 22k Hz ±0.5 dB
Line:
20 Hz- 20k Hz ±0.5 dB
Phono: ±1 dB except for controlled attenuation of -3 dB
@ 20 Hz to reduce rumble and feedback
EQUALIZER:
±12dB @ 63.250.1K.5K.17KHz
POWER CONSUMPTION:
10 Watt typical
15 watt with full headphone output
DIMENSIONS:
480mm(W) x 175mm(H) x 95mm(D)
19” (W) x 7” (H) x 4 (D)
WEIGHT:
3.5 kgs, 7.6 lbs
