Numa Patriot 180, Care & Maintenance Instructions

Page: 25 / 27

09/19/16 Page 21
Patriot
®
180
SECTION VIII
RECOMMENDED SPARES
Patriot 180
Product Description Part Number Class 1 Class 2
Backhead 8-5/8 Reg Pin 012448 0 1
Thrust Washer - Backhead End 012451 1 2
Backhead O-Ring 008158 1 2
Pin 012403 1 2
Check Valve 018121 1 2
Check Valve Spring 018122 1 2
Feed Tube Assembly 019186 1 2
Check Valve Guide 018015 0 1
Choke (Blank) 008164 0 1
Feed Tube 019095 1 2
Feed Tube O-Ring 009624 2 4
Piston 012449 0 1
Case 012450 0 1
Bit Bearing 008148 0 1
Snap Ring 008149 1 2
Bit Retaining Rings 008150 0 1
Bit Retaining Rings O-Ring 008158 1 2
Thrust Washer - Chuck End 008152 1 2
Chuck 008142 0 1
Chuck Bushing 008151 1 1
Choke Set 008163 1 2
Choke Blank (installed in hammer) 008164 0 1
Choke 1/2" 008165 0 1
For Complete Hammer Assembly #015654
Table 8-1
NOTE
Class 1 Represents a user of a Patriot 180 hammer that has readily
available spare parts.
Class 2 Represents a user of a Patriot 180 hammer that does not
have readily available spare parts.