- 7 -
1.4 Sleeping time setting
Sleeping Mode
0 5
1 6
2 7
3 8
4 9
Save
Sleeping mode setting step:
1.
Scan “default”
2.
Scan “Sleeping Mode”
3.
Scan “Sleeping mode numeric: (Unit: minute)
For example: Set sleeping mode in 10 minutes. Then needs to scan numeric “0”
“1” “0”.
Remark: Sleeping time range is from 1 to 999 minutes, and each setting needs
to have 3 digits.
4.
Scan “Save
”
Remark: After setting sleeping time, it has to scan “save” to keep the data in
the scanner. If there is any mistake happens during configuration, it needs to
redo each step again.