![NUK Smart Control Multi 310 Operating Instructions Manual Download Page 33](http://html.mh-extra.com/html/nuk/smart-control-multi-310/smart-control-multi-310_operating-instructions-manual_1716640033.webp)
31
2. To stop a video recording, tap
the
RECORD
button again.
7.1.4 Replaying video
Tap the
PLAY BACK
button to
play back a video recording. The
available videos will be shown in
a list. Select the desired video
from the list.
7.1.5 Switching off picture or sound
Tap the
VIDEO
button to switch
the image from the baby monitor
on and off. All the other functions
remain active.
Tap the
AUDIO
button to switch
the sound from the baby monitor
on and off. All the other functions
remain active.
7.1.6 Adjusting volume
Tap the
Audio Volume
button to
adjust the volume of the baby
monitor.
• A menu appears in which you can adjust
volume by means of a slide controller.
• Confirm the entry with
OK
.
Note:
the microphone sensitivity set on your
smartphone will likewise have an impact on
the volume of the baby monitor (see
"7.1.7 Adjusting microphone sensitivity" on
page 31).
7.1.7 Adjusting microphone
sensitivity
Tap the
Mic. Volume
button to
adjust the sensitivity of the baby
monitor microphone.
Note:
this setting also affects the resolution
of a message. If you reduce sensitivity here,
you need to increase noise detection (see
"7.2.4
message" on page 33) in order to receive a
message in the event of the same noise
level in the nursery.
• A menu appears in which you can adjust
sensitivity by means of the slide
controller.
• Confirm the entry with
OK
.
7.1.8 Playing music via the baby
monitor
1. Tap the
SEND MUSIC
button
to play music via the
loudspeaker of the baby
monitor.
– A list of the tracks stored on your
smartphone appears. Select one of
these tracks.
– If you have a large number of tracks
stored, it may take some time for the
app to scan the relevant list, so wait
until the list appears.
– This function is only possible with an
internal WLAN (Wi-Fi) connection. The
data rate is not adequate with an
internet connection, so the icon does
not appear in the menu.